Side Chair, Model 420-2
On View: Luce Visible Storage and Study Center, 5th Floor
Rubber-coated metal, metal, vinyl
Designed 1952-53; this example manufactured 1959
30 1/8 x 21 x 22 1/4 in. (76.5 x 53.3 x 56.5 cm) (show scale)
Bequest of William K. Jacobs, Jr.
© artist or artist's estate
Copyright for this work may be controlled by the artist, the artist's estate, or other rights holders. A more detailed analysis of its rights history may, however, place it in the public domain.
The Museum does not warrant that the use of this work will not infringe on the rights of third parties. It is your responsibility to determine and satisfy copyright or other use restrictions before copying, transmitting, or making other use of protected items beyond that allowed by "fair use," as such term is understood under the United States Copyright Act.
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact firstname.lastname@example.org
Harry Bertoia (American, born Italy, 1915-1978). Side Chair, Model 420-2, Designed 1952-53; this example manufactured 1959. Rubber-coated metal, metal, vinyl, 30 1/8 x 21 x 22 1/4 in. (76.5 x 53.3 x 56.5 cm). Brooklyn Museum, Bequest of William K. Jacobs, Jr., 1992.93.17. © artist or artist's estate (Photo: Brooklyn Museum, 1992.93.17.jpg)
overall, 1992.93.17.jpg. Brooklyn Museum photograph, 2004
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
Model 420-2, Side chair of white rubber-coated metal and black metal rods, with seat pad upholstered in orange vinyl. Chair formed by rectangular piece of white, rubber-coated wire grid bent into a continuous seat and back with rounded corners and sides. Seat bolted to supporting base composed a single length of black metal rod bent into slightly raised platform (rod starts / ends at front, rises to seat rail that runs along each side, then down to a kind of stretcher across back). This base is soldered to the tops of four canted legs, made of a single length of black metal rod bent into shape (rod starts / ends at top of back legs, runs along floor between front and back legs, and runs across front of chair at top of legs). Rectangular seat cushion is thin pad of foam rubber covered with orange vinyl; attaches to seat with straps and snap on underside.
CONDITION: Good; chair has all-over dirt and several scratches on legs; pad is dirty and strap is stretched out.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.